ContentsBroadcast
- Official Website ↗
- Description
- Download material
- Code map
- Contribute
- Competitive Models
- Manufacturer
- Send enquiry
- Vessels
- Spares
- Vendors
- Did you know
- Maintenance Schedule
Description
Basler protection relay (service).
Did you know
- The Basler Electric BE1-BPR, a microprocessor-based breaker protection relay, was first printed in December 1994.
- The BE1-BPR is part of Basler's BE1 family of digital protection devices, which also includes models like the BE1-25 Sync-Check Relay and the BE1-700V Voltage Only Digital Protective Relay.
- The BE1-BPR is designed to provide power systems with protection and security against breaker failure or to initiate multiple-shot breaker reclosings.
| Model | Function | Phase Sensing | Timing Range |
|---|---|---|---|
| BE1-BPR | Breaker Protection Relay | Three-phase-and-neutral | Configurable (fault recording, reclosing) |
| BE1-25 | Sync-Check Relay | Single-phase | 1 to 99 cycles or 0.1 to 99 seconds |
| DECS-100 | Digital Excitation Control System (AVR) | Single-phase or Three-phase | Within 1 cycle response time |
Competitive Models
^ZVCX DSEA106
Original DSEA106 (pre-MKII, legacy service).
^ZVEF SE500
Higher-capacity analog AVR.
^ZVAF SX421
Earlier shunt-excited variant, still serviced on older sets.
^ZVCU DSE0700 MKII
Pocket-size genset control.
^ZVCT DSE8510 MKII
Legacy power management (service).
Send enquiry
Send an enquiry to the manufacturer of ^ZVDY BE1-BPR. One broadcast per day.
Contribute or correct
Spotted a missing or incorrect entry? Let the maintainers know. Zulu Code is open under CC BY 4.0 — every correction strengthens the standard for the whole industry.
Code map
^Z V D Y │ │ │ └── Model: BE1-BPR │ │ └───── Make: Basler Electric │ └──────── Equipment: Automatic Voltage Regulator └─────────── System: Automation Spares